RMIX Setup | RMIX

RMIX Setup Instructions

RMIX Package Content

The product package should contain the following items:

RMIX R-Device
Power Adapter (12V, 3A)
RTA Microphone
USB Camera
XLR Cable (4 ft.)

TRS Cable (4 ft.)
Ethernet Cable (3 ft.)
Ethernet Cable (6 ft,)
Ethernet to USB-C Adapter
Warranty/Support Info Cards

Ensure all parts are in the package. If any of the parts are incorrect, missing, or damaged, please contact NUVEN support. Hold on to the package, including the original packing materials, in case you need to return the product for repair.

Powering the R-Device

a. Place the R-Device in a secure spot within 2-3 feet of your digital mixing console,

b. Plug the power adapter into your R-Device and into a power outlet.

c. Press the power button on the R-Device and ensure that the Blue LED turns on.

Note: If the device does not power on, please ensure that the power adapter is securely connected and that there is no issues with the power outlet. If the issue persists, please contact NUVEN support.

Connecting the

R-Device to Ethernet:

a. Plug in the Ethernet to USB-C Adapter into any of the USB-C ports on the R-Device.

b. Connect one side of the 6 ft. ethernet cable to the ethernet to USB-C adapter that is hooked up to the R-Device.

c. Connect the other side of the 6 ft, ethernet cable directly (or via network switch) to your Wi-Fi network router.

d. Securely connect the 3 ft, ethernet cable into the ethernet port of the R-Device labeled "TO MIXER", as well as the "Ethernet" or "Network" port of your digital mixing console.

Connecting the

R-Device to Your Mixer

a. Securely connect the 3 ft. ethernet cable into the R-device ethernet port labeled "TO MIXER", as well as the "Ethernet" or "Network" port located on your digital mixing console.

b. Locate the headphone output port on your digital mixing console (if you are unable to locate the port, please refer to your mixer's user manual or contact NUVEN support team for assistance).

Setting up the RTA Mic

Note: The RTA microphone is used to capture the venue's in-house sound, analyze the acoustics of the room, and provide an accurate house reference for our remote engineers.

Because of this, the microphone needs to be placed in an area where it is exposed to the speaker/house sounds.

a. If the R-Device is in a location close to the audience and exposed to the range of the venue speakers, place the RTA mic in an elevated position in close proximity to the R-Device. Connect the female side of the 4 ft. XLR cable to the RTA mic and the male side to the combo XLR input of the R-Device.

b. If your R-Device is in an isolated area far from the audience and out of range of the speakers, position the RTA Mic as close to the audience as possible (where it is in range of the speakers). You will need to prepare a longer XLR cable based on the distance, and connect the female side to the RTA mic, and the male side to the combo XLR input of the R-Device.

Setting up the

USB Video Camera

Note: The USB Camera is used to send real-time video signal to the remote engineer, so that they are able to make audio adjustments based on any visual cues or actions.